Online roughness measurement SORM 3plus
Consistent measurement of manufacturing-relevant surface parametersThe SORM 3plus online roughness measurement measures values such as roughness and peak value. With it, conclusions about the materials’ characteristics are now drawn in real time and materials that deviate from specifications are recognized early on. Thus, the production of scrap is significantly reduced, costs are lowered and the efficiency of the overall production is considerably increased.
Roughness is an important surface parameter, especially in the case of cold-rolled steel sheet. The standardised method of measurement used up until now is to use a stylus instrument where measurement is carried out offline by taking a specimen from the coil head end and from the coil tail end.
SORM 3plus is a non-contact online roughness measurement system, which can be used on metallic and non-metallic surfaces at production speeds of up to 1800 m/min. SORM 3plus measures online the surface roughness of the travelling strip.
By means of an optical procedure, SORM scans the surface topography. This surface profile can be compared to the profile which is determined by a tactile stylus instrument. Based on the measured profile, the roughness parameters (Ra, RPc, Rz) are calculated according to the applicable standards (DIN / ISO / SEP).
The values of surface roughness are saved, displayed online for the operator's information and may be transmitted to a higher-ranking network.
Roughness is an important surface parameter, especially in the case of cold-rolled steel sheet. The standardised method of measurement used up until now is to use a stylus instrument where measurement is carried out offline by taking a specimen from the coil head end and from the coil tail end.
SORM 3plus is a non-contact online roughness measurement system, which can be used on metallic and non-metallic surfaces at production speeds of up to 1800 m/min. SORM 3plus measures online the surface roughness of the travelling strip.
By means of an optical procedure, SORM scans the surface topography. This surface profile can be compared to the profile which is determined by a tactile stylus instrument. Based on the measured profile, the roughness parameters (Ra, RPc, Rz) are calculated according to the applicable standards (DIN / ISO / SEP).
The values of surface roughness are saved, displayed online for the operator's information and may be transmitted to a higher-ranking network.
